Nov 14, 2006 路 First, loosen the 5/8ths bolt (but don芒鈧劉t remove it yet, it keeps the ball joint from spinning) and then remove the 13mm bolt from the top. Now remove the other bolt and move the end link out of the way. Next, remove the three 14mm bolts that hold the upper strut mount in. These are found in the engine compartment. Mar 26, 2015 路 Cabin fuses in Audi A4 B6 / B7 are located under the dashboard. To access them you need to open drivers door, locate dashboard side cover and pry it.Checking
Mar 2, 2007 路 Tyres for a 19" package will be 245/35/19 93Y. There are no other 19" (or 20" for that matter), that have the required load rating without exceeding the OD constraint. Wheels will be 19x8 or 19x8.5. The only other detail to be confirmed is the offset needed to clear the front inner suspension upright.

Nov 10, 2010 路 Driving a B7 is like driving a go kart compared to a B8. Driving a B2 is like driving a go kart compared to a B3-B8 Audi. One big difference in the B8 is the 2.0T engine. Its much improved and features a timing chain and valve lift for extra torque/hp.

Nov 14, 2006 路 Step 1: Jack the car up and remove one of the back wheels. Step 1a: If you don't have a second jack, put the car up on a jackstand. Step 2: Take a look at the rear suspension, the concentic bolt at the top of the rear hub (circled in red) is what is used to adjust the camber. Step 3: Loosen ( don't remove) the nut (loosen it just enough to be
. 730 363 612 44 698 649 500 334

audi a4 b7 tips and tricks